ZMR250 Fiberglass Mini Quadcopter Review

by MaxPower | August 3, 2014 | (5) Posted in Reviews

The following videos are my journey building a 250 size racer quadcopter on a budget. I wanted to see if I like the 250 size quads before fully investing in more expensive parts.

Breakdown of parts and cost (just to build the basic quadcopter not including radio and batteries):

  • Frame: ZMR250 Fiberglass Quadcopter Frame: $20
  • Motors: ZMR 1804-2400kv: $10 each
  • ESCs: EMAX Simon Series ESC: $12 each
  • Flight controller: KK2 - $30
  • Props: 5030 Gemfan: $5
  • FPV Camera: Sony CCD: $18
  • Transmitter: 200mw mini transmitter: $32

So far I am really liking this quadcopter, it's loads of fun.

 

ZMR 250 Mini Quadcopter Review - Part 1 - Overview of the Frame

 

ZMR 250 Mini Quadcopter Review - Part 2 - Setup and Flight

 

ZMR 250 Mini Quadcopter Review - Amp Draw Test

 

ZMR 1804-2400kv Motor Review and Thrust Test

 

Some pictures:

COMMENTS

FLYitRC on August 19, 2014
I have these Motors on my QAV250, pretty much the same set-up. using a flip 1.5 instead of a KK2. Mine flys the same on a 2200MAH, I use nanotech 1300's for great performance 45C. and cruising/footage im using a zippy compact 1800MAH 25C, onlyt weighs 15 grams more than the 1300MAH.


1300MAH battery:
http://hobbyking.com/hobbyking/store/__20751__Turnigy_nano_tech_1300mAh_3S_45_90C_Lipo_Pack_USA_Warehouse_.html

1800MAH battery:
http://hobbyking.com/hobbyking/store/__24614__ZIPPY_Compact_1800mAh_3S_25C_Lipo_Pack_USA_Warehouse_.html
Log In to reply
MaxPower on August 19, 2014
Thanks I'll check out the 1800mah for sure.
Log In to reply
royce.meredith on August 20, 2014
Be aware that if you purchase this frame, the fiberglass is VERY cheap. I bought this quad, hit a tree, fell from about 6 feet and broke an arm. The fiberglass that is used in the arms is very weak. I have heard much better things about the carbon fiber version. Good luck in your flying!
Log In to reply
PaladinDG on August 18, 2014
Great review... I have been considering this exact frame and motors, so this was VERY helpful!
Log In to reply
TiagoNunes on January 8, 2016
Hey guys. I have another frame but I really love those red spacers in this frame. Can i get it separate somewhere? or simmilar?
Log In to reply
wanabeRCexpert on January 20, 2017
links?
Log In to reply

You need to log-in to comment on articles.


ZMR250 Fiberglass Mini Quadcopter Review