I will now tell you about my diy delivery drone. It is a quadcopter that I built a few years ago and recently I decided to upgrade the FC to give it autonomous flight capabilities. The FC is a pixhawk which adds tons of functionality. I know this drone is very simple and in the future will I make more advanced drones as well.
Watch the full video on youtube!
https://www.youtube.com/watch?v=3DWSdXZn9GQ&t=18s
Details
It uses strong 3515 650kv Emax motors. The spec sheet says that they will produce 2.8kg of thrust each with 13 inch props and a 6s.
The landing gear mounts are 3d printed as well as the drop mechanism.
No Comments Yet
Be the first to leave one!