Hey there!
I was out flying FPV with my Bixler2 and a Gopro3 Silver for recording.
Looking back, I made some very critical mistakes witch almost cost me my plane...
So instead of just repair and fly again, i decided to show you what went wrong and summarise it in a little entertaining clip.
My Setup:
Tx/Rx - Futaba 6ex with Full Range Reciever
VTx - 800mw 1.3 Ghz (In this Video linear polarised)
VRx - 1.3 Ghz (In this Video Stock antenna)
Camera - Pixim Seawolf Clone
GPS - Nova Storm OSD
If you have any questions to my Setup or something else, just post a comment. I will try to answer all of them.
Please ignore my bad english;)
Log In to reply
thx
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Log In to reply
It's this Motor
http://www.hobbyking.com/hobbyking/store/__21481__NTM_Prop_Drive_28_36_2200KV_696W.html
6x4 Prop
and a 60 amp esc.
Best Power Setup you can get. Sucks 2.5 amps cruising around. And lots of power in spare.
Log In to reply