We thought it'd be fun to launch the KA-8 Sailplane from the air with our E-Flite Apprentice!
You can see our review of the KA-8 Sailplane HERE!
Our E-flite Apprentice is supp'ed up with a Lazertoyz.com "Beef" motor. You can find out more HERE!
We thought it'd be fun to launch the KA-8 Sailplane from the air with our E-Flite Apprentice!
You can see our review of the KA-8 Sailplane HERE!
Our E-flite Apprentice is supp'ed up with a Lazertoyz.com "Beef" motor. You can find out more HERE!
Log In to reply
Log In to reply
Log In to reply
Log In to reply
But could anybody point us to where you found the carrying structure? Or do you have any plans for it?
Thanks for watching and thanks stonecap production for sponsoring this episode! :P
Log In to reply
Log In to reply
Log In to reply
I'm trying to get a couple hours a week that I can fly/maintain the rc planes I have. keep it going guys.
Log In to reply
Log In to reply
Log In to reply
Log In to reply
And what kind of variometer?
Log In to reply
Log In to reply
Also your first rocket plane attempt was with a piggy back system mabey you could try it again with this piggy back setup, then ignighte rocket in midair.
-Andrew
Log In to reply
OOH! RV Jet at 8:38
Log In to reply
Log In to reply
Log In to reply
Log In to reply
I know you are a professional. You have (as they say in Russian) - Golden Hands! This means that you can do with their hands a lot.
I watched for a long time to your ground station. I saw how you were doing it on your website.
Unfortunately I do not have 'supplies (laser) for the manufacture of such a thing.
Perhaps, David, you release set for the assembly of your ground station? Or at least give the body drawings, please. I beg you.
Just as described on your site via a relay connection scheme. But it is described in words! :) I would be more understandable if the scheme was drawn. :)
David, Please Respond ...
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Log In to reply