My GEEBEE R3 swapable and other builds

After building so many scratch builds i decided to try and build one of my own designs,I took a three view of the geebee r3 and had it blown up on a A1 format cut out all the pattern and layed them all on A0 paper,I used the FT slinger as a referance to build the fuselage.The slinger wings were used to do the geebee wings but i had to move the bends and spar slightly foward. The canpoy is a two liter soda bottle cut and shaped and I sprayed the inside with black paint and lacure the measurements are as follow:

wingspan     36"

and from nose to tail      29"

the fuselarge is 4" wide tapering down to an inch at the tail

1200 kv motor

3 bladed 8x6 prop with 2" spinner

80 amp esc with separate bec 

2200 3 cell lipo but plenty of room for 4 or 5 cell

I will try to get video when weather gets better

FT RIPSLINGER

FT SPITFIRE

FT BABY BLENDER with mirror reflective decals