Solder school: Bullet connectors

by wongthomas | June 24, 2012 | (14) Posted in Tips

Hey Guys,

First part of solder school.

Howto solder bullet connectors.

Not a lot more to say then this is the most easy connector to solder if you ask me.

Ask what kind of connector you like to how to solder.

As always hope you enjoy and follow on twitter @grumpyreview

- Find this article & others like it at www.FliteTest.com -

COMMENTS

3dRCrazy on July 2, 2012
Thanks alot! This video was just what I was looking for!
Log In to reply
House Of Noob on June 25, 2012
Thanks Grumpy!
Log In to reply
Beemerider on June 25, 2012
Very professionally done!

I would respectfully like to add a comment of my own, I've been working on radio equipment and soldering all manner of connections for near 40 years. I've found that having a small tin of Kester Soldering Paste to be a tremendous aide when having any difficulty in tinning wire and adjacent connectors. Most quality solder has soldering flux inside the solder, I just like to give it "help" occasionally.
Log In to reply
earthsciteach on June 24, 2012
Nice tutorial video. Well done.
Log In to reply
ecoster on October 4, 2013
I usually put a small part of the wire in the connector and wait until the tin on the wire liquifies before pushing it in all the way to get a solid bond.
Log In to reply
thenewguy on January 29, 2014
do you put the male connector on the esc or the motor
Log In to reply
cofogugi@coreclip.com on September 5, 2017
great blog and nice one
Log In to reply
cofogugi@coreclip.com on September 5, 2017
SOLDER SCHOOL: BULLET CONNECTORS
http://www.poslajutrackings.com/
Log In to reply
cofogugi@coreclip.com on September 5, 2017
[url=http://www.poslajutrackings.com/]poslaju tracking[/url]
Log In to reply

You need to log-in to comment on articles.

wongthomas

(65)

Solder school: Bullet connectors