Mini Hex - What's my name?

by Zatoichi | July 6, 2014 | (10) Posted in Reviews

 Pat G's New WASP!

 

A huge thank you to everyone that helped Pat find a name for this beast.

Congratulations to TRACKS for picking the winning name!

What you get with this model is big fun in a small package! This craft is a joy to fly. Fast ,light ,and very responsive. Took a hit to the ground,solid enough to kill an OSD, and not a scratch on her.

Bellissimo Patrizio!

" Simplicity, Durability and Affordability." With this in mind, Pat designed the frame to be as light and tough as possible. In order for it to be simple to assemble it has a minimal amount of plates and hardware.

 

 Nicely engineered with a full carbon fiber lower deck and arms it is rigid and light. 323 mm at the widest and 725 grams AUW with a 2200mah 3s and FPV gear. Arms will fit a range of motors and will accommodate 6 inch props!

The design has a low parts count and goes together quickly.  

 

Pat G's mini Hex frame.
Full Carbon lower plate and arms. Yellow G10 top deck

-  1 x Mini – Camera Mount 1.5mm CF
- 8 x Black Nylon M3x35mm  Standoff
- 4 x Black Nylon Male-Female M3x6mm  Standoff
- 4 x Black Nylon  M3 Nuts
- 12x Black Nylon M3x5mm Bolts (for top plate)
- 12x Black Nylon M3x5mm Bolts (for bottom plate)
- 18x Stainless Steel M3x10mm Bolts
- 18x Stainless Steel M3 nylon lock-nuts
- 4x Rubber dampers for camera

 

HIEE 1.5w TS3215 5.8G Video Tx

 

RunCam Sky camera 2.1mm wide lens

 

KVOSD

 

Fr Sky DR4 II 4ch telemetry receiver

 

RCX 1804 (2400KV) Micro Outrunners

 

RCX 10A ESC Brushless Motor Speed Controller (G Series / Programed for Multicopter - SimonK Firmware)

The RCX motors and 10 amp escs are fine but I am going to switch to Cobra 2204 2300kv motors and 12 amp escs or something close for more power 

 

Minion frames and parts at these fine locations.

 Canada

http://patsminihquad.com

 

http://www.greathobbies.com/index.php

 

http://www.hoverallrc.com

 

http://www.bcmultirotors.com

 

 

http://rotorgeeks.com/index.php?route=product/product&product_id=90

 

U.S.A

 

http://diyquadcopter.com.


http://www.getfpv.com/

COMMENTS

Acarlos on July 6, 2014
Alien tick
Log In to reply
SleepyM on July 7, 2014
The Space Frame
Carbon Space Frame
(Matthew Sleep)
Log In to reply
Zatoichi on July 21, 2014
lol nice one man.
Log In to reply
Acarlos on July 7, 2014
Elder Hex (Box Elder Bug)
or
Boisea Trivittata Hex
Log In to reply
Zatoichi on July 21, 2014
I have them lil suckers all over my yard!lol

Log In to reply
Acarlos on July 7, 2014
Jewel Hex - (Jewel bug)
Log In to reply
Hunter Staples on July 7, 2014
Morsus Spider
Latin for "Flying Spider"
Log In to reply
Lonnie on July 7, 2014
Its simple. "Spider Hex"
Log In to reply
janko.hrasko on July 14, 2014
how about black widow? cause it looks like a sexi spider ;)
http://static.comicvine.com/uploads/original/11114/111144625/3747668-scarlett+johansson+as+black+widow++(1).jpg
Log In to reply
Zatoichi on July 21, 2014
Yoou sir have great taste!

Log In to reply
eatingjif on July 30, 2014
Six legs so cant be an Arachnid

Formidihex/Forminihex/ from the latin for the ant family - Formicidae
320 FPV Roach - looks like a cockroach
Bugout Mini-hex

Few stabs in the dark, cannot wait to try this frame


Log In to reply
casehatter on July 6, 2014
Yep the Name BugaBee just fits..!! It ain't a Bug but it might be a Bee.. Nice production dude..!!
Log In to reply
FatKat on July 6, 2014
I dub it the !!! JV Machete "Jason vorhees" because it resembles an evil face with a white hockey mask over it and the props are the blades !!
Log In to reply
Zatoichi on July 9, 2014
)>.<( i can dig it.
Log In to reply
T-Richard on July 7, 2014
hex-diptera
Log In to reply
scarredmadman on July 7, 2014
The Hornet, Hornet Hex or Hex Hornet because it looks like its a sleek frame that will be the dominant predator in the skies.
Log In to reply
1morehobby on July 7, 2014
Lady Bug
Log In to reply
Freaky_1 on July 6, 2014
The Scarab

Frank
Log In to reply
Starbuck79 on August 2, 2014
Scarab really fits.
Log In to reply
bdogzzz on July 6, 2014
Night Wasp
Log In to reply
RAM on July 6, 2014
It's probably not a dignified name for such a beauty but when I looked at the first photo the first thing that came to mind was SPLAT!

Reminded me of a bug on my visor :)

Nice design.
Log In to reply
Zatoichi on July 9, 2014
Hahaha This is the name of all my models!
Log In to reply
marc60 on July 7, 2014
I'd say The jitter-bug, it's fast and it's fun :)
https://www.youtube.com/watch?v=p1fwq3tP7cg
Log In to reply
Zatoichi on July 21, 2014
I like this one

Log In to reply
encor79 on July 16, 2014
Pat's HeXess frame. Hex=excess thrust. Hexes=curses. Pat put a spell on me with that first picture he posted!! :D
Log In to reply
patrizio_g on July 16, 2014
Lol
I think my voodoo is working ;)
Log In to reply
centralksfpv on July 18, 2014
6ix 300, Mini size, Max performance racing Hex.
Log In to reply
Fatherfox on July 7, 2014
btw, can't tell if the arms are vib isolated. i was thinking something along these lines mahaps... http://shockandvibration.eliteemc.com/HDD--and--PCB-Anti-vibration-mounts.php ..
Log In to reply
RCBernDog on July 6, 2014
"Venom"
Log In to reply
Supergoldfish on July 6, 2014
Scarab
Log In to reply
schumixmd on July 7, 2014
JustAnotherMiniHex :)
Log In to reply
Zatoichi on July 21, 2014
Haha Roman. =)

Log In to reply
schumixmd on July 22, 2014
you can call it Hexoman :) but I am still for the first version ;)
Log In to reply
Acarlos on July 7, 2014
Beetle X
Log In to reply
MT Alex on July 9, 2014
Like a lot of others, when I first looked at the frame I thought "Scarab." Unfortunately, that name has already been taken by a MultiwiiCopter that looks nothing like a scarab. I'll try and think of another, but if I won the frame my wife would come unglued about all of the new motors and escs I'd need.

"The Zat" has a pretty good ring to it ;)
Log In to reply
Zatoichi on July 21, 2014
Flattery will get you far ! Beuno!
Log In to reply
Freaky_1 on July 12, 2014
Pincer since I see Scarab is out

Frank
Log In to reply
Jabar on July 15, 2014
The Tick
Log In to reply
Zatoichi on July 21, 2014
You guys are just amazing !This has turned out to be really cool. THank you all so very much for your thought and suggestions! Pat is diligently sorting through all the killer entries. So many good ones!
Log In to reply
ashtodust2000 on July 6, 2014
"Kakerlake" german translatation for cockroach
Log In to reply
jameswil on July 6, 2014
cyber hex
Log In to reply
Bellows on July 7, 2014
HexanBeast or (Hexenbiest (HEK-sən-beest; Germ)
Very powerful and a little scary.
Log In to reply
Zatoichi on July 21, 2014
You said it man. nice one.

Log In to reply
patrizio_g on July 15, 2014
It does looks like a tick lol

Ok guys the final drawing it's almost done I just have to make it 3D check few things and then i will get the first batch once I have it here then time is on we and there will be one winner :D For now I can tell you I got her on a diet so she will be lighter ;) as soon as I get the 3D drawing I will post it here.

Keep the names comming guys.
Log In to reply
Starbuck79 on August 2, 2014
How about BeetleJuice, BeetleJuice, BeetleJuice!

Just a thought!
Log In to reply
T3d on July 7, 2014
Lipoptena cervi

My wife saw this and she said after ten seconds video played - deer fly.
Here in Finland we have lots of those in forest where we pick up berries. And my wife hetes those deer fly a lot... :)
Lipoptena cervi is latin name for deer fly.
Log In to reply
Zatoichi on July 21, 2014
Thanks to your wife man. Those deer flies bite over here.

Log In to reply
DeValk on July 8, 2014
"Angry Crab" Hex
Log In to reply
Flat4 on July 6, 2014
Overlord, Commander of your Minion. =)
Log In to reply
Zatoichi on July 21, 2014
Not bad at all.
Log In to reply
Flymann on July 7, 2014
How about The Carbon Dagger?
Log In to reply
nicky0855 on July 8, 2014
skyhex
Log In to reply
newby on July 13, 2014
Juicex, Palmetto, BlackFlagg, Sphex (pronounced; specs), RiceBug, Carbonex, WTX! (WhatTheHex!), are my thoughts. Hope one of them flies!
Log In to reply
Zatoichi on July 21, 2014
BlackFlagg! That is tight!

Log In to reply
Gopherdave on July 21, 2014
Hello
Couple more thoughts.
Merlin
Nimrod
Cyborg
Log In to reply
Zatoichi on July 21, 2014
Nimrod is great!
Log In to reply
centralksfpv on July 18, 2014
Minion 6ix or Minion 6ix 300
Log In to reply
patrizio_g on August 8, 2014
Lol nice guys
I will pick a name tonight and a winner will be announced tomorrow Zatoichi will be doing the honor here :) it's his thread after all.
Log In to reply
humphrey111 on July 6, 2014
lil' buggah
Log In to reply
thatjoshguy on July 9, 2014
the PatSix
Log In to reply
donnyb on July 10, 2014
All right I have to put my two cents in. I tie Flies for fishing. And here is a few names. the caddisfly, mayfly, junebug, grasshopper , the hummingbird, the Locust, the lighting bug, Firefly if its not taken the mosquito
Log In to reply
Zatoichi on July 21, 2014
I think that is a dimes worth m8! Nice Job!

Log In to reply
Flymann on July 11, 2014
How about "Andreas?"
Log In to reply
Gopherdave on July 6, 2014
Hello from Canada.
It shall be known as "The Floyd" in honor of your music.
Pats mini Floyd
Pats mini Spidex.
Pats mini Beatle.
Pats mini hex could have a nice home with me, I'll take good care of it, well sometimes.

Dave

Log In to reply
Zatoichi on July 9, 2014
Hahaha Awesome.=) "Floyd"
Log In to reply
T3d on July 7, 2014
Dragon Fly Carbon Mini Hex

I love films How to train your dragon.
And i dream to have some day something to fly fpv.
Only thing i have is Nine Eagles 20 cm long mini helicopter.
Log In to reply
Zatoichi on July 21, 2014
I dig it. cool man.
Thanks

Log In to reply
Phil Dici on July 7, 2014
Hello,
The Devil6 or D6vil or Arnitoile6.
Phil
Log In to reply
Fatherfox on July 6, 2014
put a mobius gimbal on the back and call it the scorpion. even just a lrs antenna. but scarab works too.

Log In to reply
Fatherfox on July 7, 2014
hey, remember those long tiki looking voodoo masks? with the thinner yellow plate i'm thinking the voodoo 250. it is 250 sized, yes?
Log In to reply
Zatoichi on July 9, 2014
324 wide m2m. But I get what you mean.=)
Log In to reply
Acarlos on July 6, 2014
http://www.beastsofwar.com/wp-content/uploads/2012/06/Alien-Bugs.jpg

Log In to reply
Zatoichi on July 9, 2014
Wow.=0
Log In to reply
hicwic on July 11, 2014
you could also name it "Henry" as the Six Legged Octopus

Or more generaly "Hexapus"

See here :
http://en.wikipedia.org/wiki/Henry_the_Hexapus
Log In to reply
Wallace Waggner on July 6, 2014
THE CARBON SPIDER
THE NEWEST, AND MOST POTENT, MINI HEX
Log In to reply
bluefishnz on July 7, 2014
Well considering the Pink Floyd music in the video,

I dub thee the "DarkSide 6"


Log In to reply
Zatoichi on July 9, 2014
Nice one. =)

Log In to reply
hicwic on July 8, 2014
Hi from France

My idea is "Shiva Mask"

Because of the indian goddess shiva which have multiple arms, and when i saw the frame for the first time i think of a hockey mask. This name give it a holy touch i like :)

(sorry if my english was not perfect)
Log In to reply
Zatoichi on July 21, 2014
You have fine english m8! I find your suggestion verry cool! Good on you man!
Log In to reply
patrizio_g on July 29, 2014
Ok guys In about two weeks from now I should be getting the first batch of the hex so that's about the time left to post more names and after that there will be a winner :) this weekend I will post the list with the names that I like the most.

Good luck guys

Log In to reply
thatjoshguy on July 9, 2014
how about the Hydra? Six shooter? Mini6? or go all modern with just "6"
Log In to reply
Zatoichi on July 21, 2014
I dig the 6shooter!
Log In to reply
FlyTexas! on July 15, 2014
Cicada. Sometimes referred to as a locust.
Log In to reply
kheatherly13@gmail.com on July 24, 2014
How about the Sky Spider

Kevin
Log In to reply
bluetear000 on July 6, 2014
i would say roach is the perfect fit
Log In to reply
1morehobby on July 7, 2014
Herbie (the love bug)
Log In to reply
patrizio_g on July 7, 2014
Good job Zat. ;)

Wow guys those are a bunch of names I will start writing down all the cool names with the author and the forum so everyone can see what's going on :D

If this turns out fun like I think it will I will do this with a Minion frame but more details later ;)

Log In to reply
Kiowa Mech on July 7, 2014
I like " Dark Manson", because it looks evil. If that doesn't work how about "Lil Asskikr"
Log In to reply
Zatoichi on July 21, 2014
Mebby not the most family friendly name,but then Pat wasn't crazy about my suggestion of Sauron's Helm.lol
Log In to reply
Sonicg on July 8, 2014
Roach Rage
Log In to reply
patrizio_g on July 10, 2014
Wow you guys are doing grate comming up with names :)
Keep posting there is still time, I will get a list going with the names that are making it hopefully this weekend.

Cheers guys.
Log In to reply
watak on July 11, 2014
Miniwitch

You know Hex --> Witch?

:)
Log In to reply
BigJess on July 14, 2014
What about Master? SixChief or Boss6.
Log In to reply
Zatoichi on July 21, 2014
Master has a hellofa ring to it!

Log In to reply
Kablahz on July 11, 2014
Simple... "Arachnid"
Log In to reply
encor79 on July 18, 2014
sentinel, morpheus, prometheus, *promiscuous* :D
Log In to reply
encor79 on July 21, 2014
Hextasy :D
Log In to reply
Zatoichi on July 21, 2014
That is what I am experiencing! Nice!
Log In to reply
Gopherdave on July 21, 2014
Hello.
I really like the name Minion from the movies Despicable me and Mega Mind, I wonder how you came up with the name Minion? Here's another try.
Spyderbot.

I soo want to win this and I would be famous the world over like the Bixler, well sort of, hahaha.

Dave.
Log In to reply
Wallace Waggner on July 31, 2014
when is the winner going to be chosen
Log In to reply

You need to log-in to comment on articles.


Mini Hex - What's my name?