Hobbyking's KK2 control board Walkthrough by dhdsracer

Tips


Rating: 4.58      24 ratings
Posted: June 26, 2012  |  2,287 views
INFLUENCE 69%
      
Log In To Rate This Article

Ok guys, here is a walkthrough of the long awaited KK2 control board. I have been testing this board and have had great success with it. Take a look at my walkthrough and expect more details on set up, tuning and flight footage very soon! 

Comments

stonekap June 27, 2012
Thanks for posting Don! Now you need to get your other videos on here too.
Log In to reply
jamiedco July 3, 2012
hello

im designing my new quad to take the kk2.0 board from the start . what are the distances from hole centre to hole centre for mounting .

much appreciated
Log In to reply
edanC August 11, 2012
Hey man, great video, thank you. I have a question about setup. I have my ESCs setup for soft start. When increasing power I get to a good safe rpm, increase a little more and the quad rapidly accelerates into the air and so I kill power so I don't loose it. Your other videos show really controlled lift off and hover. Any ideas on what I could be doing wrong? Keep the videos coming man, the one in the field doing flips etc is sick.
Log In to reply
colorex June 26, 2012
You could upload the video to HobbyKing too - they might give you $5 in credit!
Log In to reply
Macgiver11 June 28, 2012
Thank you very much! really appreciated!
Log In to reply
Josh Bixler June 27, 2012
I can't wait to try this out! What a great value!
Log In to reply
ukbozzy June 27, 2012
Brilliant Video thanks, as someone whos new to multirotors and had problems with the old kk board this will be a great board. I cant wait to get one now..
Log In to reply
Numex106 June 27, 2012
great! thanks
Log In to reply
ycopter June 28, 2012
Great article, I'm looking forward to the tuning and set-up tips.
Log In to reply
Fuzz_NZ June 27, 2012
Mine is on the way :) Shipping to New Zealand is fast from HK also. Should be here this week :D
Log In to reply
Macgiver11 June 27, 2012
Hope U dn't mind the request! but would U pls tk d' time to show how the setting & connections will work to stabilize a delta wing? that is all what I have and honestly I just can make heads or tails of it!

Thanks Really nice video!
Log In to reply
dhdsracer June 28, 2012
Not a problem. I'll test it out and see what I come up with. One problem that you will come up against is powering the board and servos. You need to split off the power leed to m1 and m2-8 in order to power the board and give power to your servos. I'll explane it all in a video fairly soon here. Take care!
Log In to reply
Non Action Man July 4, 2012
Great vid! +1 for you!
Log In to reply

Log In to leave comments

Channels

Areas of Interest

Miscellaneous