Easy Drone Scratch Build by bixler13

Projects


Rating: 3.64      14 ratings
Posted: May 23, 2012  |  1,965 views
INFLUENCE 55%
      
Log In To Rate This Article

The Easy Drone is a remote control airplane that I designed myself for fpv. It is a very easy build and flies really good. The plane is very stable and gets good lift. Although it is intended for fpv, it does not need to be flown fpv. If you are not into fpv planes, this would be a great plane to build and fly. 

Wing:
Wingspan: 60 inches
Root Cord(including ailerons): 10.5
Root Cord(not including ailerons): 9
Airfoil: 5X60

Fuselage:
Length:21
Width:4
Height:2.25

Tail:
length:5 incl. elevator
Elevator:1
Width:15
Middle vert stab height: 5
Side vert stab height: 3.5

Total Length: 44.5
Carbon Spar Length(from trailing edge of wing to leading edge of elevator): 18.5
Material: Dollar Tree Foam board and Home Depot 1/2 inch pink foam for airfoil
Attached Thumbnails

Comments

schraut5 May 29, 2012
Sweet looking plane! Looks like it flew well too!
Log In to reply
House Of Noob June 7, 2012
I saw someone else who put the tape on (ailerons) smoothly and easily by using a credit card like a squeegee.
Log In to reply
sprout_less June 1, 2012
I am currently building it, and it looks sweet, but did you ever mention the center of gravity?
Log In to reply
bixler13 June 1, 2012
1/4-1/3 of the root chord is what i use for rectangle style wings. So about 3 inches back from the leading edge of the wing.
Thanks
Log In to reply
subsonichobby January 4, 2013
Just started to design a RC plane.... http://subsonichobby.blogspot.com/2012/12/diy-subsonicdrone-v1.html .... Any advice? Thrust angle?
Log In to reply
sprout_less June 6, 2012
http://www.youtube.com/watch?v=AXfomV6VvAY

Love the plane.
Log In to reply

Log In to leave comments

Channels

Areas of Interest

Miscellaneous